Jowat® offers a universal EVA hot melt adhesive "Weiß/Weiß" for edgebanding applications, suitable for a broad spectrum of materials and all standard edgebanding machines.
For bonding thermoplastic edge tapes (such as ABS, PP, PVC, PET, PMMA), resin-coated decorative paper, CPL, HPL, veneer edge tapes (with/without fleece lamination) and solid wood edges. In principle, the bonding properties and, if necessary, the backside priming of the edge materials must be checked for the application before use. Can be used for straight edges, soft forming and pre-coating.
Hot melt adhesive formulations are based on different polymers and resins, and are mixed with additives, such as pigments and stabilizers, which facilitates a broad spectrum of applications. When the adhesive cools, its cohesion increases and produces a strong and permanent bond between the substrates. Reactive hot melt adhesives undergo an additional, subsequent chemical crosslinking reaction which increases the resistance to high temperatures and moisture, and which ensures reliable adhesion in difficult conditions.
- Universally applicable for common edge materials
- Low viscosity and therefore easy to dose
- No fiber pickup
- No adhesive bleed
Technical data (286.31)
| Name |
Value |
| Color |
Weiß (Weiß) |
| Texture |
Cartridge |
| Additives |
unfilled |
| Range per kg |
up to 300m/kg |
| Container |
Cartridges |
| Content |
48Stk |
| Basic |
Ethylen-Vinylacetat (EVA) |
| Viscosity |
bei 200 °C: 50.000 ± 15.000 mPas (Brookfield, Thermosel Spindel 29, 5 UPM) |
| Processing temperature |
180 – 200 °C (356 - 392 °F) |
| Density |
ca. 1,05 ± 0,05 g/cm³ (Jowat Prüfmethode) |
| VOC content (Swiss) |
0,00% |
| Open waiting time film |
9 ± 2 Sekunden (Jowat Prüfmethode bei 190 °C) |
| Softening area |
90 ± 5 °C (Kofler Heizbank) |
| Feed rate |
10 - 60 m/min |
| Machine |
Holz-Her Edgebanding machines |
EN
DE
